DecorFlex Coat Hybrid exterior foam coating
aesthetic - hard - strong - flexible
| DecorFlex Coat Hybrid is an extremely flexible and durable weather-resistant multipolymer-coating for EPS and XPS facade profiles. Door- and window frames, decorative elements, cornices, crown mouldings, belt profiles, sill profiles can be covered with this protective coating with the help of an automatic Foam Mouldings Coating Machine [1]. |  Use nanopolymer hardened polystirene elements instead of fragile gypsum cornices. |
 Ready-to-use protective coating for mass production. |
This mass is designed to luting fusion of decorative profiles. It can be used for filling cavities and leveling the surface of decorative profiles. It includes suspension of inorganic filler in polymer binder with intentional additives. Hydrosoluble and it doesn’t include organic solvents. It is intended for use outside and inside.
For the protection of classic cornices, gothic crown mouldings, arch foam elements, keystones, pilasters base and capitals, wall-medallion and other non-linear elements use our DecorFlex Premix [2] binder plus quartz sand combination. For economical reasons we sell the binder only, please, buy the quartz sand locally.
| DecorFlex Coat Hybrid | |
| hybrid coating of polymer compound containing silica sand | |
|
Colour |
natural silica sand |
| Use for | coating for external profiles |
|
Packages |
35 kg - bucket |
|
Density [g/cm3] |
1,9 - 2,0 |
|
pH of the mass |
7 - 8 |
|
Content of non-volatile substances [% m/m] |
88,0 - 92,0 |
|
Absorption of the mass [%] |
≤4,0 |
|
Mass resistance on exposure to light quartz lamps with a power of 400 W within 12 hours |
no change |
|
Grip weight to the styrofoam [MPa] |
|
|
Resistance to impact of weight able to dry-air [J] |
≥9,8 |
|
Mass resistance on exposure to atmospheric conditions [MPa] |
≥0,20 or break in styrofoam |
|
Resistance on exposure to temperature variables for 5 cycles |
≥0,20 or break in styrofoam |
|
Frost resistance of mass [MPa] |
≥0,20 or break in styrofoam |
|
Resistance to high temperature of 50 ± 2°C for 5 days [MPa] |
≥0,20 or break in styrofoam |
| Hybrid 01 | Hybrid 02 | |
| Main features | sun resistant water resistant highly flexible |
sun resistant 100% water resistant highly flexible |
| Thickness of the layer | max. 3 mm | max. 2 mm |
| Sand granulation size | max. 8 mm | max. 8 mm |
Certification
The outer filler DecorFlex Coat Hybrid was tested by The Centre of Research and Development - Paints, Adhesives and Polymers SPEKTROCHEM and meets the requirements of the standards: PN-EN 15824:2009, PN-91/B-10105, PN-B-10106:1997.
Spektrochem clearance No. 80/2011.
How to apply
Before applying the mass use a slow-rotating drilling machine equipped with a stirrer for mixing. The mass must not be diluted. Do the job at an ambient temperature of 10°C to 30°C on a not sunny and dry surface.
Hybrid 01 blending time: 8 min, 650 revolutions per minute using vaned disk.
Hybrid 02 blending time: 5 min, 650 revolutions per minute using vaned disk.
Hybrid 03 blending time: 4 min, 550-560 revolutions per minute using 24cm vaned disk.
Drying temperature: 15°C - 25°C. Drying time: 24h/1mm.
After complete drying gives up her grind. Clean tools with tap water immediately after completion of the works.
Recommended coating thickness:
Hybrid 01: max. 3 mm.
Hybrid 02: max. 2 mm.
Hybrid 03: max. 3 mm.
Storage
In the original packaging the product retains its properties for 12 months from the date of manufacture. Keep at a temperature of 10°C to 40°C in factory sealed packages. Protect from frost and excessive sun exposure! The product is not flammable.
Large
capacity over head stirrer
Safety
S2 Protect from children.
S20 At work do not eat or smoke.
S24 Avoid contact with skin.
S25 Avoid contact with eyes.
S26 Contaminated with the eyes, rinse immediately with plenty of water and seek
medical advice.
S27 Dirty and soaked the packaging immediately stripped.
S28 In case of skin contact immediately wash with water and soap.
S40 The floor and soiled items to clean using water with a detergent.
S45 In case of accident or malaise, immediately call your doctor and show the
label.
S46 If swallowed, immediately seek medical advice - show label and packaging.